<Main Specifications>
TOKO can adjust machine dimensions to meet customer needs.
Width: MIN600mm—MAX3500mm
Depth: MIN600mm—MAX3500mm
* Can be manufactured in increments of 100mm.

The table is mobile.
(Material/mold is placed on the table and cut.)

<Tonnage>
Select from:
50TON
75TON
100TON
120TON
150TON
200TON
250TON
300TON

<Cutting Method>
TOKO has adopted LS (limit switch) and PS (pressure switch).
LS punching allows you to adjust the lower limit, so the punching height can be easily set.
PS punching allows for the punching accuracy to be constant by placing the platen on parallel blocks (4 points) that are part of the machine body and using the mechanical end for cutting.

<Options>
You can choose a single-sided table (for working alone) or a double-sided table (for working as a pair).
Punching die clamping device (punching dies can be set on the platen side)
Mat moving device
Electric parallel blocks
Table forward limit setting device
Absolute detector
Half-cut specification
Front and rear lines