<TFP-T-1000 Series Compressed Air Vacuum Forming Machine>
◎Main Specifications
Forming Area: MIN600mm (Width)×600mm (Feed)
　　　　: MAX1050mm (Width)×1170mm (Feed)
Material Width: MIN640mm～MAX1060mm
Material Thickness: MIN0.2mm～MAX1.5mm
Forming Depth: MAX150mm (both top & bottom)
Compacting Pressure: 45 tons
Open Height Top Table: MIN345mm—MAX480mm
Bottom Table: MIN345mm—MAX480mm
Shut Height Top Table: MIN115mm—MAX250mm
　　　　　　　　Bottom Table: MIN115mm—MAX250mm
Table Stroke: Upper Part: 230mm; Lower Part: 230mm
Forming Method: Compressed Air, Vacuum Forming
Raw Materials: OPS, HIPS, PP, A-PET, etc.

◎Features
・Prevention of chip powder being made by using a chain clip system for the sheet feed
・Equipped with quick heater and temperature correcting function for stable forming

◎Options
・Sizing Cutter Device (circular running-type)
・Vacuum Pump
・Die Temperature Controller

<TCP Series　Servo Toggle Type　Super Shuttle Machine>
◎Main Specifications
Effective Cutting Area: 1100mm (Width)×1200mm (Feed)
Max. Cutting Pressure: 75 tons
Platen Vertical Stroke: 20—200mm
Cut Product Collecting Device: Servo Motor Drive
Automatic Frame-removing Device: Clamping Type
Mat Transfer Device: Electric Type

◎Features
・Smooth separation of product from scrap and collection of product
・AC servo motor used for movement with vacuum BOX for high-speed and high-precision
・Thomson die cut unit and mating die can be used for cutting
・Cutting machine uses high-speed type of vertical cutting
・Simplified setup process

◎Options
・Static Elimination Equipment
・Electric Parallel Blocks